-
Low MOQ for Sand Blasting Sand - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
Low price for Carbon Shot - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
Low MOQ for Steel T Shot - Forging steel ball – Feng Erda
Model/Size:30-150mm Product Detail: Forging steel roling ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro... -
Hot Selling for Silico Manganese - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
Manufacuring Companies for Ferrochrome Alloy - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
Chinese wholesale Granalla - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially... -
Leading Manufacturer for Abrasive Sand - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
Super Purchasing for Casi - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Manufacturer for Ferro Silicon Price - Ferro Molybdenum – Feng Erda
Size:1-100mm Basic Info： International brand of ferromolybdenum（GB3649-2008） Brand name chemical composition（wt%） Mo Si S P C Cu Sb Sn ≤ FeMo70 65.0-75.0 1.5 0.10 0.05 0.10 0.5 FeMo70Cu1 65.0-75.0 2.0 0.10 0.05 0.10 1.0 FeMo70Cu1.5 65.0-75.0 2.5 0.20 0.10 0.10 1.5 FeMo60-A 55.0-65.0 1.0 0.10 0.04 0.10 0.5 0.04 0.04 FeMo60-B 55.0-65.0 1.5 ... -
Factory Price Hollow Steel Ball - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
Manufactur standard Gautam Ferro Alloys - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
Hot sale Ferro Silicon Manganese Price - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
100% Original Factory Amasteel Grit - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
2020 China New Design Ferrosilicon Powder - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
Good Wholesale Vendors SS304 Stainless Steel Shot - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially... -
Professional Design Shot Blasting - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
Factory Cheap Hot Ferrosilicon Production - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Newly Arrival Calcium-Silicon - Ferro Molybdenum – Feng Erda
Size:1-100mm Basic Info： International brand of ferromolybdenum（GB3649-2008） Brand name chemical composition（wt%） Mo Si S P C Cu Sb Sn ≤ FeMo70 65.0-75.0 1.5 0.10 0.05 0.10 0.5 FeMo70Cu1 65.0-75.0 2.0 0.10 0.05 0.10 1.0 FeMo70Cu1.5 65.0-75.0 2.5 0.20 0.10 0.10 1.5 FeMo60-A 55.0-65.0 1.0 0.10 0.04 0.10 0.5 0.04 0.04 FeMo60-B 55.0-65.0 1.5 ... -
2020 High quality peening machine - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
Big Discount SiMn alloy - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
Massive Selection for Blasting Sand - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Good Wholesale Vendors 304 Stainless Steel Balls - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Factory Cheap Hot Rounded Shot - Cut Wire Shot/Used Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting... -
OEM/ODM China Aluminium cut wire - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Factory supplied Steel Grit G25 - Cut Wire Shot/Used Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting... -
Factory directly Ferro-Alloy Resources - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
New Fashion Design for Ss Steel Ball - Red Copper shot/copper cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as... -
Factory best selling Manganese - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
Cheap price Stainless Steel Grit - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
Special Price for Cut wire - Grinding Steel Shot – Feng Erda
Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa... -
Hot New Products Steel Wire Angular Grit - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Good Quality Copper Shot - Grinding Steel Shot – Feng Erda
Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa... -
Cheapest Factory Ferro Alloys - Ferro Molybdenum – Feng Erda
Size:1-100mm Basic Info： International brand of ferromolybdenum（GB3649-2008） Brand name chemical composition（wt%） Mo Si S P C Cu Sb Sn ≤ FeMo70 65.0-75.0 1.5 0.10 0.05 0.10 0.5 FeMo70Cu1 65.0-75.0 2.0 0.10 0.05 0.10 1.0 FeMo70Cu1.5 65.0-75.0 2.5 0.20 0.10 0.10 1.5 FeMo60-A 55.0-65.0 1.0 0.10 0.04 0.10 0.5 0.04 0.04 FeMo60-B 55.0-65.0 1.5 ... -
Factory directly Ferro-Alloy Resources - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
Factory making Steel additive - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
New Delivery for Abrasive Grit - Grinding Steel Shot – Feng Erda
Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa... -
Factory Cheap Silicon - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Factory Outlets Hc Ferro Manganese - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
Factory directly Ferro-Alloy Resources - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
Wholesale Dealers of Zinc cut wire - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
2020 High quality Silicon Manganese Alloy - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
Bottom price Steel Grit - Forged Stainless Steel Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM... -
100% Original Factory Amasteel Grit - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
Special Price for Solid Steel Ball - High Carbon Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION 0.8-1.2% P ≤0... -
18 Years Factory Steel pellets - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
100% Original Factory Amasteel Grit - High Carbon Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION 0.8-1.2% P ≤0... -
Lowest Price for Ss Shot - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
China Cheap price round ball blasting media - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Wholesale Price Cut Wire Shot G0 - Forging steel ball – Feng Erda
Model/Size:30-150mm Product Detail: Forging steel roling ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro... -
Fixed Competitive Price Aluminum Steel Shot - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
- Telephone
- 0086-632-5985228
- info@fengerda.com
