-
Best-Selling Estate Steel Shot - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
Manufactur standard rust removal - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
High Performance Heavy Metal Steel Shot - Red Copper shot/copper cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as... -
Good Quality Abrasive - Forged Stainless Steel Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM... -
Factory wholesale Ferro Silico Manganese - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
Hot Sale for Steel Cut Wire Shot - Low Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982... -
Super Lowest Price Steel Sand - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Manufacturing Companies for Hernic Ferrochrome Contact Details - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
High Performance Carburizers - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Factory Supply High Carbon Ferro Chrome - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Excellent quality Maithan Ferro Alloys - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Bottom price WGR STEEL GRITS - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
Reasonable price Fesi75 - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Original Factory Steel Abrasives - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
High Performance Heavy Metal Steel Shot - Cut Wire Shot/Used Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting... -
Manufacturing Companies for Ss Ball Price - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
High reputation Ferrochrome Price Per Ton Today - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
2020 Good Quality Micro carbon ferro chrome - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Super Purchasing for Carbon Steel Ball - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Factory source Ferrochrome Price Per Ton - Silicon Manganese Alloy – Feng Erda
Size:1-100mm Basic Info： International Brand of Silicon Manganese Alloy（GB4008-2008） Brand name chemical composition（%） Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ... -
Professional Design Shot Blasting - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Top Quality Low Carbon Angular Steel Grit - Grinding Steel Shot – Feng Erda
Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa... -
8 Year Exporter mixed abrasive - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
One of Hottest for Grinding Steels Shot Suppliers - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Reasonable price for Casi for Cast Iron - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
High Performance Steel Shot Ballast - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
8 Year Exporter Alloys Of Ferrous Metals - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
Super Purchasing for Casi - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Big Discount Shot Blasting Grit - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
Free sample for Low Carbon Ferro Chrome Price - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Super Lowest Price Cut wire pellets - High Carbon Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION 0.8-1.2% P ≤0... -
Factory Outlets Rolling Ball - Forging steel ball – Feng Erda
Model/Size:30-150mm Product Detail: Forging steel roling ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro... -
Hot Sale for Steel Cut Wire Shot - Forged Stainless Steel Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM... -
Top Suppliers Ferrous Alloys List - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
New Arrival China Ferrous Alloys - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Good Quality Casting Inoculants - FerroChrome – Feng Erda
Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel. According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China for increasing proportion of the world’s ferrochrome producti... -
Best quality Steel shot plant - Red Copper shot/copper cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as... -
Online Exporter Manganese Steel - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
100% Original Ferro Alloys Corp - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Hot New Products Ferrosilicon Price - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Factory Promotional Sand Casting Steel - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Fixed Competitive Price Shot Peening - Grinding Steel Shot – Feng Erda
Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa... -
Factory wholesale Ferro Silico Manganese - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
China Supplier STAINLESS STEEL POWDER - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
2020 New Style Conditioned Cut Wire Shot - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Factory best selling Manganese - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
High Quality Foundry Inoculants - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Professional Design Shot Blasting - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
One of Hottest for Grinding Steels Shot Suppliers - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Factory Cheap Hot surface treatment - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
- Telephone
- 0086-632-5985228
- info@fengerda.com
