-
China wholesale Ferrosilicon - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Hot Selling for Hybrid Abrasives - Forging steel ball – Feng Erda
Model/Size:30-150mm Product Detail: Forging steel roling ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro... -
Factory wholesale Ferro Silico Manganese - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Factory supplied Steel Grit G25 - Red Copper shot/copper cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as... -
Good Wholesale Vendors Steelmint Ferro Chrome Price - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
Original Factory Amasteel Shot - High Carbon Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION 0.8-1.2% P ≤0... -
Professional China S390 - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
Low price for Fecr - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
Competitive Price for Ferro Molybdenum Manufacturing Process - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Newly Arrival Stainless Steel Shots - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
Hot-selling High manganese steel shot - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
2020 High quality Silicon Manganese Alloy - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
China Gold Supplier for Bulk Steel Shot For Sale - Grinding Steel Shot – Feng Erda
Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa... -
China Factory for High carbon steel shots - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
High Quality for Hernic Ferrochrome News - FerroChrome – Feng Erda
Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel. According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China for increasing proportion of the world’s ferrochrome producti... -
High reputation Metal additive - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
Hot sale Ferro Silicon Manganese Price - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Manufactur standard Ball Steel - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
Wholesale Price China Stainless steel cut wire - Red Copper shot/copper cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as... -
Good Wholesale Vendors 304 Stainless Steel Balls - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
Factory directly supply FeSi 65 - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
Cheapest Price Abrasive for Cast Iron - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially... -
OEM/ODM China Grinding Steel Shot - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
Personlized Products Steel Ball With Hole - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
Massive Selection for Blasting Sand - Cut Wire Shot/Used Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting... -
Discountable price Shot Grit - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
China Cheap price Ferromanganese - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
Factory Outlets Rolling Ball - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially... -
Competitive Price for Abrasive blast - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Excellent quality Surface Cleaning - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially... -
PriceList for Steel Ball - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
High definition Ferrochrome Price - Silicon Manganese Alloy – Feng Erda
Size:1-100mm Basic Info： International Brand of Silicon Manganese Alloy（GB4008-2008） Brand name chemical composition（%） Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ... -
2020 wholesale price Ferro Molybdenum - FerroChrome – Feng Erda
Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel. According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China for increasing proportion of the world’s ferrochrome producti... -
Special Price for Ferro Silicon Magnesium - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Free sample for Low Carbon Ferro Chrome Price - Ferro Molybdenum – Feng Erda
Size:1-100mm Basic Info： International brand of ferromolybdenum（GB3649-2008） Brand name chemical composition（wt%） Mo Si S P C Cu Sb Sn ≤ FeMo70 65.0-75.0 1.5 0.10 0.05 0.10 0.5 FeMo70Cu1 65.0-75.0 2.0 0.10 0.05 0.10 1.0 FeMo70Cu1.5 65.0-75.0 2.5 0.20 0.10 0.10 1.5 FeMo60-A 55.0-65.0 1.0 0.10 0.04 0.10 0.5 0.04 0.04 FeMo60-B 55.0-65.0 1.5 ... -
China Cheap price Ferro manganese - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
Hot Sale for Steel Cut Wire Shot - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Discount Price LCFeMn - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Top Suppliers Metal Ball - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
2020 High quality FeMn68Si18 - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
New Fashion Design for Ss Steel Ball - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Wholesale Price Ferro Silicon Lumps - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Lowest Price for High carbon abrasive - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
Best Price for Steel Balls - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Professional China Ferrochrome - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Popular Design for Low Carbon Steel Shot - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
PriceList for Nordic Ferro Alloy - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Reasonable price Fesi75 - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
China Supplier STAINLESS STEEL POWDER - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
2020 Good Quality steel shot ball - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
- Telephone
- 0086-632-5985228
- info@fengerda.com
