-
Discount Price Buy Steel Shot - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
PriceList for Nordic Ferro Alloy - FerroChrome – Feng Erda
Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel. According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China for increasing proportion of the world’s ferrochrome producti... -
One of Hottest for Fully Angular Steel Grit - Cast Stainless Steel Shot – Feng Erda
Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be tolerated. This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur... -
Competitive Price for Best Steel Shot For Geese - Stainless Steel Cut Wire Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object... -
Factory For Steel Shot And Grit - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially... -
Hot sale Factory Inoculant Ba-Silicon Calcium Barium - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Big discounting Alloy material - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
High Quality Foundry Inoculants - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
100% Original Ferro Alloys Corp - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Wholesale Ferrosilicon Price Per Ton - Silicon Manganese Alloy – Feng Erda
Size:1-100mm Basic Info： International Brand of Silicon Manganese Alloy（GB4008-2008） Brand name chemical composition（%） Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ... -
Reasonable price for Casi for Cast Iron - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
Original Factory Steel Abrasives - High Carbon Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION 0.8-1.2% P ≤0... -
8 Year Exporter Al Tamman Indsil Ferro Chrome Llc - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Fast delivery Ferro Alloys Company - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Best quality Steel shot plant - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
Factory directly supply FeSi 65 - FerroSilicon – Feng Erda
Size:1-100mm Basic Info： Ferrosilicon International Brand（GB2272-2009） Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ... -
Factory Supply Ferroalloys Metal - FerroChrome – Feng Erda
Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel. According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China for increasing proportion of the world’s ferrochrome producti... -
High Performance Steel Shot Ballast - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
2020 High quality Silicon Manganese Alloy - Calcium-Silicon(CaSi) – Feng Erda
Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ... -
Factory making Steel additive - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
Factory selling FeSiMg - Ferro Molybdenum – Feng Erda
Size:1-100mm Basic Info： International brand of ferromolybdenum（GB3649-2008） Brand name chemical composition（wt%） Mo Si S P C Cu Sb Sn ≤ FeMo70 65.0-75.0 1.5 0.10 0.05 0.10 0.5 FeMo70Cu1 65.0-75.0 2.0 0.10 0.05 0.10 1.0 FeMo70Cu1.5 65.0-75.0 2.5 0.20 0.10 0.10 1.5 FeMo60-A 55.0-65.0 1.0 0.10 0.04 0.10 0.5 0.04 0.04 FeMo60-B 55.0-65.0 1.5 ... -
Fast delivery HYBRID SHOT - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
Big discounting Steel Grit Abrasive - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
Fast delivery Ferro Alloys Company - Magnesium-Silicon (MgSi) – Feng Erda
Product name: Ferro Silicon Magnesium inoculant (MgSi) Model/Size: 3-20mm,5-25mm,10-30mm Product Detail: Ferro silicon magnesium Nodulizer is remelting alloy composing of rare earth, magnesium, silicon and calcium. Ferro silicon magnesium nodulizer is an excellent nodulizer with strong effect of deoxidation and desulfurization. Ferrosilicon, Ce+La mish metal or rare earth ferrosilicon and magnesium are the main raw materials of Ferro silicon magnesium Nodulizer. The production of ferro silico... -
High definition Blasting Abrasive Grit - Forged Stainless Steel Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM... -
Cheap PriceList for Girija Ferro Alloy - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
Well-designed Bearing grit - High Carbon Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION 0.8-1.2% P ≤0... -
Best-Selling Estate Steel Shot - Red Copper shot/copper cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as... -
Factory Cheap Hot Ferrosilicon Production - Silicon Manganese Alloy – Feng Erda
Size:1-100mm Basic Info： International Brand of Silicon Manganese Alloy（GB4008-2008） Brand name chemical composition（%） Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ... -
2020 High quality Steel Grit Blasting Abrasive Supplier - Low Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982... -
Factory making Steel additive - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
2020 Latest Design Ferro Silicon Manganese - Silicon Manganese Alloy – Feng Erda
Size:1-100mm Basic Info： International Brand of Silicon Manganese Alloy（GB4008-2008） Brand name chemical composition（%） Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ... -
Discountable price Abrasive Sandblasting - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Low price for High Performance Grit - Aluminum shot/cut wire shot – Feng Erda
Model/Size: 0.6-3.0mm Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product... -
Cheap price Ferrochrome Price 2018 - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
Top Quality BLASTING SPECIALISTS - Zinc shot/Zinc cut wire shot – Feng Erda
Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi... -
Hot sale Ferro Silicon Zirconium - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
Big Discount Shot Blasting Grit - Forging steel ball – Feng Erda
Model/Size:30-150mm Product Detail: Forging steel roling ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro... -
Wholesale Dealers of Carbon Ferro Chrome - Ferro Molybdenum – Feng Erda
Size:1-100mm Basic Info： International brand of ferromolybdenum（GB3649-2008） Brand name chemical composition（wt%） Mo Si S P C Cu Sb Sn ≤ FeMo70 65.0-75.0 1.5 0.10 0.05 0.10 0.5 FeMo70Cu1 65.0-75.0 2.0 0.10 0.05 0.10 1.0 FeMo70Cu1.5 65.0-75.0 2.5 0.20 0.10 0.10 1.5 FeMo60-A 55.0-65.0 1.0 0.10 0.04 0.10 0.5 0.04 0.04 FeMo60-B 55.0-65.0 1.5 ... -
Manufactur standard rust removal - Bearing Angular Steel Grit – Feng Erda
Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO9556:1989 ISO 4... -
China Gold Supplier for HCFeMn - Nodulizer(ReMgSiFe) – Feng Erda
Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm 3-20mm Product Detail: Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened. It is ... -
High Quality for Steel pellet - Forged Stainless Steel Shot – Feng Erda
Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM... -
Chinese wholesale Nodulizing Agent - Strontium-Silicon(SrSi) – Feng Erda
Product name: Ferro silicon strontium inoculant （SrSi） Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th... -
PriceList for High Carbon Ferro Silicon - Barium-Silicon(BaSi) – Feng Erda
Product name: Ferro Silicon barium inoculant （Basi） Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba... -
New Arrival China Stainless Steel Shot - Low Carbon Angular Steel Grit – Feng Erda
Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 Si 0.1-2.0% Cr / Mn 0.35-1.5% Mo / S ≤0.05% Ni / MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³（7.0kg/dm³） GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ... -
Good quality Ferro Silicon Calcium - Silicon Manganese Alloy – Feng Erda
Size:1-100mm Basic Info： International Brand of Silicon Manganese Alloy（GB4008-2008） Brand name chemical composition（%） Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ... -
Reasonable price for Casi for Cast Iron - FerroManganese – Feng Erda
Size:1-100mm Basic Info： Ferromanganese International Brand category Brand name chemical composition（wt%） Mn C Si P S Ⅰ Ⅱ Ⅰ Ⅱ Range ≤ Low carbon ferromanganese FeMn82C0.2 85.0—92.0 0.2 1.0 2.0 0.10 0.30 0.02 FeMn84C0.4 80.0—87.0 0.4 1.0 2.0 0.15 0.30 0.02 FeMn84C0.7 80.0—87.0 0.7 1.0 2.0 0.20 0.30 0.02 category Brand name chemical composition（wt%） Mn C Si P S Ⅰ... -
Manufacturer of Lc Ferro Chrome - Carburizers(Carbon raisers) – Feng Erda
Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car... -
Popular Design for Low Carbon Steel Shot - High Carbon Rounded Steel Shot – Feng Erda
Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp... -
China Factory for High Carbon Angular Steel Grit - Cut Wire Shot/New Wire – Feng Erda
Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
- Telephone
- 0086-632-5985228
- info@fengerda.com
