Telephone
0086-632-5985228
E-mail
info@fengerda.com

High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for 12ga Steel Shot , Casting steel shot , Steel Shot And Grit , By more than 8 years of company, now we have accumulated rich experience and advanced technologies from the generation of our merchandise.
High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda Detail:

Product name: Ferro silicon strontium inoculant (SrSi)

Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm             

Product Detail:

Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of barium and calcium would have. The combination of barium and calcium has better control on the chill than the inoculant containing calcium only has.

Ferro silicon strontium mainly used as casting inoculant ,strontium in ferrosilicon inoculant is one of the most effective promotion elemtnts ,when large undercooling degree, strontiuim has a special function .to reduce the number of eutectic group can reduce shrinkage ,shrinkage defects of casting.

China gold supplier new products FeSiSr

Key Specifications :

Fe-Si-Sr

Sr:

Si:

Ca: Max

Al: Max

0.6-1.0%

46-50%

0.1%

0.5%

0.6-1.0%

73-78%

0.1%

0.5%

0.7-1.1%

73-78%

0.1%

0.5%

0.8-1.2%

73-78%

0.1%

0.5%

1.0-1.5%

70-75%

0.1%

0.5%

2.0-3.0%

70-75%

0.1%

0.5%

Performance and features:

1. Significantly increasing graphitization core, refine graphite, promote the A-type graphite in grey iron and graphite tending to be round in ductile iron, improve spheroidizing level;

2. Immensely reduce the chilling tendency, reduce relative hardness, improving cutting performance;

3. Strong recession-resistant capability, prevent inoculation and nodulizing recession;

4. Improve the homogeneity of fracture surface, reduce shrinking tendency;

5. Stable chemical composition, homogeneous particle size, deviation in composition and quality deviation is low;

6.Low melting point (near 1300℃), easy to be melt in inoculation processing, little scum.

Application :

Ferro silicon strontium inoculant suitable for thin-walled or chilled sweet ash sulfur cast has strong ink capabilities ,but also for ductile iron ball to increase the number of ink , especially high corrosion resistance of nickel ductile iron (containing Ni14%,Cu6%,Cr2%,Si 1.5%) in addition,since it reduces white without significantly increasing the number of eutectic ,especially for applications that require no casting dense loose,the water pressure resistance gray cast to good effect ,strong ink and carbon Si-Ca of molten  inoculant different allowable temperature is low .and calcium ,the amount of aluminum is low ,less shaped residue ,no vacuum casting defects.


Product detail pictures:

High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda detail pictures

High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda detail pictures

High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda detail pictures

High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda detail pictures


Related Product Guide:

We not only will try our greatest to offer superb companies to just about every buyer, but also are ready to receive any suggestion offered by our shoppers for High Quality for Ferrochrome Alloys - Strontium-Silicon(SrSi) – Feng Erda , The product will supply to all over the world, such as: Swansea, Peru, US, We supply skilled service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound items with good logistics service and economical cost. Depending on this, our products and solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ??customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
  • This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Marcie Green from Russia - 2018.11.22 12:28
    Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Carol from Montreal - 2017.02.28 14:19
    Write your message here and send it to us